THIS PRODUCT IS FLAMMABLE AND MAY REQUIRE ADDITIONAL SHIPPING CHARGES. PLEASE CALL FOR DETAILS 07 5574 5811

This product is an acrylic based concrete coating suitable for most concrete surfaces. It provides a highly durable surface, with excellent adhesion that blocks the penetration of dirt, oil, grease, chemicals and stains, making the concrete easier to clean and maintain. It is wear resistant making it suitable for high traffic areas. Can be made into a satin or matt finish by either adding the 399 Flattening Base or Factory Packed.  The 750 Concrete Sealer can be used with the Unicote 300 Tinter range. 750 Concrete Sealer is Available in 18LT & 20LT.

Application of 750 Concrete Sealer and 750 Tint Colours 

Step 1:  Ensure all surfaces are clean and dry, all dust, etc, is removed from the surface.  The 20LT 750 Concrete Sealer does not require mixing, the 1LT 750 Colour tints are designed to be mixed with the 750 Concrete sealer 19LT product.  As these products are supplied ready to use they do not require a reducer or thinner.

Step 2:  Seal and saturate the concrete using the product, to achieve this by brush or roller you must apply multiple passes. The practical spreading rate required to cover for film build can vary considerably, due to a multitude of different factors. Ensure that the area is well ventilated to remove fumes from the coating during application.

Step 3:  Wait 5-10 minutes between coats, 2-3 coats are required for full coverage, avoid heavy wet coats. Do not allow pools or puddles of thick coating to form, remove any excessive build up.  Air dry the area for at least 40-60 minutes to allow the sealer to dry completely